Difference between revisions of "TireRemovalTool"
From LinerWiki
m (Added witness copuler nut 'link' to front wheel removal tool) |
|||
| Line 8: | Line 8: | ||
Insert the socket extension through the backwards spark plug socket, resulting in the correct size wrench. Please see the attached pictures. | Insert the socket extension through the backwards spark plug socket, resulting in the correct size wrench. Please see the attached pictures. | ||
| + | |||
| + | '''Also, thanks to 7th Son:''' | ||
| + | |||
| + | [http://www.homedepot.com/p/Simpson-Strong-Tie-CNW1-2-1-2-in-Witness-Coupler-Nut-CNW1-2/202092467 Witness Coupler Nut] | ||
| + | |||
| + | Use of a 1/2" coupler nut and a 3/4" or 19mm socket to drive it is also a very good, inexpensive alternative. | ||
Reference: http://forums.delphiforums.com/starroadliner/messages?msg=10314.12 | Reference: http://forums.delphiforums.com/starroadliner/messages?msg=10314.12 | ||
Revision as of 14:40, 28 May 2014
Making a Tool to Remove the Front Axle
The front wheel axle requires the use of a 19mm (3/4") allen head wrench or socket. Since most people don't have a 19mm allen head laying around, a rather ingenious member of the forum came up with this solution:
Parts required:
- 3/8" Socket extension
- 3/8" Spark plug socket
Insert the socket extension through the backwards spark plug socket, resulting in the correct size wrench. Please see the attached pictures.
Also, thanks to 7th Son:
Use of a 1/2" coupler nut and a 3/4" or 19mm socket to drive it is also a very good, inexpensive alternative.
Reference: http://forums.delphiforums.com/starroadliner/messages?msg=10314.12
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
