Difference between revisions of "TireRemovalTool"
(→Making a Tool to Remove the Front Axle) |
|||
| Line 19: | Line 19: | ||
Reference: http://forums.delphiforums.com/starroadliner/messages/?msg=28942.1 | Reference: http://forums.delphiforums.com/starroadliner/messages/?msg=28942.1 | ||
| − | The following image links have gone bad (They have been left | + | The following image links have gone bad (They have been left here for administrative reference for later repair. Sorry for the inconvenience - Route6T6) |
[[Image:tire_removal_tools1.jpg]] | [[Image:tire_removal_tools1.jpg]] | ||
[[Image:tire_removal_tools2.jpg]] | [[Image:tire_removal_tools2.jpg]] | ||
Revision as of 19:52, 13 October 2014
Making a Tool to Remove the Front Axle
The front wheel axle requires the use of a 19mm (3/4") allen head wrench or socket. Since most people don't have a 19mm allen head laying around, a rather ingenious member of the forum came up with this solution:
Parts required:
- 3/8" Socket extension
- 3/8" Spark plug socket
Insert the socket extension through the backwards spark plug socket, resulting in the correct size wrench. Please see the attached pictures.
Also, thanks to 7th Son:
Use of a 1/2" coupler nut and a 3/4" or 19mm socket to drive it is also a very good, inexpensive alternative.
Reference: http://forums.delphiforums.com/starroadliner/messages?msg=10314.12
Reference: http://forums.delphiforums.com/starroadliner/messages/?msg=28942.1
The following image links have gone bad (They have been left here for administrative reference for later repair. Sorry for the inconvenience - Route6T6)
