Primary Drive Pully

Primary Drive Pulley

Hey - got a serious warning for everybody - I was just working on the pulley mod and discovered that the PRIMARY DRIVE PULLEY NUT was loose - as in finger tight.... I spun it off with my fingers, no wrench needed.

This is a nut that's supposed to be torqued to 100 ft lbs and staked in place. I hate to think what would happen if it got loose. It's under a cover that's easy to get open to check this and there's no oil in it - I suggest everyone take a good look at this ASAP.

Its behind the round chrome cover on the left side of the motor just behind the floor board.

It has slotted vents, its the front pulley on your drive belt.

References: 12800.1